Maintenance and Care Guide for Air Water Generators

250L atmospheric water generator are devices that produce drinking water by extracting moisture from the air. Reasonable maintenance and care can not only extend the service life of the Atmospheric Water Generator Manufacturers, but also improve its working efficiency and ensure the safety of the water quality produced. Here are some practical maintenance and care suggestions.

1. Regular cleaning and disinfection

Cleaning the water tank and filter: Check the water tank and filter regularly, and it is recommended to clean them every 1 to 2 months. Wash with warm water and neutral detergent, do not use strong acid or strong alkaline detergents.

Disinfection: Perform a comprehensive disinfection every 3 to 6 months. Diluted bleach or special disinfectants can be used, and make sure to rinse thoroughly to avoid residue.

2. Monitor the status of the filter element

Replace the filter element: Replace the filter element regularly according to the manufacturer's recommendations. Generally, the activated carbon filter element needs to be replaced within 6 to 12 months, while the HEPA filter element may need to be replaced every 1 to 2 years.

Check the filter element blockage: If the device has a decrease in water flow or deterioration in water quality, it may be a sign of filter blockage and needs to be checked in time.

3. Pay attention to environmental humidity and temperature

Suitable environment: The working efficiency of the air water machine is closely related to the environmental humidity and temperature. Keep the equipment working in an environment of 20 to 30°C and more than 50% humidity for best results.

Avoid high temperature and quality change environment: Avoid placing the equipment in direct sunlight or high temperature environment, which may affect the components and efficiency of the machine.

4. Check components regularly

Check the power cord and plug: Check the power cord and plug regularly for damage to ensure the safe use of the equipment. If any problems are found, replace or repair them in time.

Observe the water flow and condensation: Check whether the machine is operating normally, observe whether the water flow is smooth, and whether the condensed water is discharged normally. If there is any abnormality, contact after-sales service in time.

5. Record usage

Usage log: Record the usage of the equipment, including working hours, water output, filter replacement time, etc., to facilitate subsequent maintenance and troubleshooting.

Pay attention to abnormal conditions: If the water quality is reduced, odor, abnormal noise, etc., it should be handled in time, and contact professionals for maintenance if necessary.

6. Storage and Relocation

Proper storage: When not in use, ensure that the equipment is stored in a dry, cool place, and the power and water supply are turned off.

Relocation Note: When moving the equipment, ensure that it is emptied to avoid residual water in the water tank. Handle it with care to avoid shock and vibration, and protect the customized parts from damage.

With regular maintenance and care, the 500L atmospheric water generator can continue to work efficiently and ensure that the drinking water produced is safe and hygienic. Following the above guidelines can effectively extend the service life of the equipment and maintain a stable water supply. If you encounter problems that cannot be solved during maintenance, it is recommended to seek professional technical support and after-sales service to ensure that the equipment is always in optimal operating condition.